I believe the glutaraldehyde is a thin film on the glass (like a single molecule thick), and so very little of it ends up inside the cell. Glutaraldehyde doesn't kill cells on contact with the membrane, at least not immediately, it needs to get inside the cell and destroy important proteins.
I guess the point of contention is how much of it is used. I know glutaraldehyde is used for electron microscopy specifically, but perhaps in higher doses than here for E. coli. Did they only put it on one end? Was the E. coli upright? I suppose so since they claim this was new.
There is nothing about AFM which precludes it from being used on living things. This isnāt like SEM or other microscopy processes that require costing in a conductive material. Itās just a force probe. Itās just, as the article notes, getting things to sit still long enough for the photo that is difficult with living things.
TFA basically coats a surface with the molecular scale equivalent of superglue, then scans while everything is stuck in place. The bacteria will die of course, but not in the ~30min it takes to make the image.
It's really cool. My startup is using it to perform atom-by-atom mechanochemistry, to bootstrap diamondoid molecular nanotechnology. We're at UHV and low temps so we can actually see the bumps of individual atoms, but even the much lower resolution, non-atomically-precise bio scans are amazing. You're literally looking at individual proteins on the surface.
And not only that, but that itās the sort of technology thatās more-or-less amenable to DIYā¦
I feel like at some point I watched one of the usual homelab-science-hacker YouTubers build a sophisticated one in their garage, but the specific video is escaping meā¦
I know. This is my first introduction to AFM, I immediately stopped reading the article and spent 10 minutes googling it. That is just wild. Wikipedia has some good images of the little stick guy: https://en.wikipedia.org/wiki/Atomic_force_microscopy#/media...
These images may not be that interesting, it's probably more about the technique. The interesting results will come from applying it across species and imaging it during different phases of reproduction.
"With some of the most dangerous pathogens on the planet becoming increasingly resistant to our best drugs, these photos could help develop more effective treatments that attack specific vulnerabilities in the āarmorā of the bacteria. "
Cool stuff, but better look at the original nature article: https://www.nature.com/articles/s41467-026-78975-y
Also... glutaraldehyde is not keeping the bacteria alive. It's a biocide. but it does keep the structure intact as a fixative, pretty big difference:)
I believe the glutaraldehyde is a thin film on the glass (like a single molecule thick), and so very little of it ends up inside the cell. Glutaraldehyde doesn't kill cells on contact with the membrane, at least not immediately, it needs to get inside the cell and destroy important proteins.
I guess the point of contention is how much of it is used. I know glutaraldehyde is used for electron microscopy specifically, but perhaps in higher doses than here for E. coli. Did they only put it on one end? Was the E. coli upright? I suppose so since they claim this was new.
The article you linked has 'of living bacteria' in the title though?
I was wondering, it might just be very recently deceased.
Edit:
>Surface immobilization on glutaraldehyde-functionalized slides facilitated high-resolution AFM images of living P. aeruginosa
Right, but when AFM is used, I think the bacterium is already dead. At the least I have not heard of AFM being used on living entities.
There is nothing about AFM which precludes it from being used on living things. This isnāt like SEM or other microscopy processes that require costing in a conductive material. Itās just a force probe. Itās just, as the article notes, getting things to sit still long enough for the photo that is difficult with living things.
TFA basically coats a surface with the molecular scale equivalent of superglue, then scans while everything is stuck in place. The bacteria will die of course, but not in the ~30min it takes to make the image.
> force probe
Oh my god, I thought they were using SEM! Never heard of this method before.
> Atomic force microscopy (AFM) gathers information by "feeling" or "touching" the surface with a mechanical probe.
https://en.wikipedia.org/wiki/Atomic_force_microscopy
Gnarly.
It's really cool. My startup is using it to perform atom-by-atom mechanochemistry, to bootstrap diamondoid molecular nanotechnology. We're at UHV and low temps so we can actually see the bumps of individual atoms, but even the much lower resolution, non-atomically-precise bio scans are amazing. You're literally looking at individual proteins on the surface.
Edit: This is one of my favorite images. It looks like you're looking at E. coli, but no that's pentacene. You're looking at individual carbon atoms. Note the scale bars: https://www.researchgate.net/figure/Resolving-the-chemical-s...
holy smokes that's insane
I still canāt get over the fact that atomic force microscopy is a thing. Literally ātap on it a bunch with an atomic-scale little stickāā¦
https://m.youtube.com/watch?v=s6KqJS1GZNE
And not only that, but that itās the sort of technology thatās more-or-less amenable to DIYā¦
I feel like at some point I watched one of the usual homelab-science-hacker YouTubers build a sophisticated one in their garage, but the specific video is escaping meā¦
Breaking Taps?
https://www.youtube.com/watch?v=2Kv6KwADn7Q
I know. This is my first introduction to AFM, I immediately stopped reading the article and spent 10 minutes googling it. That is just wild. Wikipedia has some good images of the little stick guy: https://en.wikipedia.org/wiki/Atomic_force_microscopy#/media...
What useful information do such images provide? It just looks like a vaguely lumpy surface.
These images may not be that interesting, it's probably more about the technique. The interesting results will come from applying it across species and imaging it during different phases of reproduction.
"With some of the most dangerous pathogens on the planet becoming increasingly resistant to our best drugs, these photos could help develop more effective treatments that attack specific vulnerabilities in the āarmorā of the bacteria. "
You and and I may not see anything useful, but others might, and AI could also see patterns where we can't.
Polska najlepsza!
If the rod-shaped bacterium was square, it would look like krowki.
Looks almost like a little moon.
E. coli is now probably by far the number #1 bacterium of literally anything studied.